lipo2000®transfection reagent -九游会ag

transfection reagents
lipo2000®transfection reagent
product id: 029-1.5ml
1800元/支/1.5ml
products

lipo2000®transfection reagent

 

 lipo2000®, lip2000®,lipo3000®和lip3000®are registered trademarks and strictly forbidden to be used without authorization


description

lipo2000® is a newly developed and proprietary reagent for the transfection of nucleic acids into eukaryotic cells. lipo2000® has the following advantages: 

the highest transfection efficiency in many cell types and formats. 

dna-lipo2000® complexes can be directly added to cells in culture medium (with or without serum). 

it is not necessary to remove dna-lipo2000™ complexes or change medium following transfection. 

the complexes can be removed after 4-6 hours by replacing with refresh medium (optional)


contents and storage 

     lipo2000®is supplied in liquid form at a concentration of 1mg/ml.   store at 4oc.do not freeze.

product qualification

     lipo2000®has been extensively tested by transfection of hek293 cells with an egfp reporter containing  plasmid. lipo2000®is free of microbial contamination.

 

important guidelines

follow these guidelines when performing transfections:

 

1.     the ratio of dna(inµg:lipo2000®(in µl) to use when preparing complexes should be 1:2 to1:3 for most celllines. to transfect 0.5 -2 x105cells in a 24-well format, use 0.8-1 µgdna and 2-3 µl of lipo2000. optimizing transfection by varying dna/lipo2000®ratio is possible. 

2.   it is criticalto transfect cells at high celld ensity.90-95% confluence the time of transfection is recommended to obtain high efficiency and expression levels and tominimize decreased cell growth associated with high transfection activity. lower cell densities are suitable with optimization of conditions.take care to maintain a standard seeding protocol between experiments because transfection efficiency is dependent on culture confluence.

 3.   do not add antibiotics to media durintransfection as this will cause cell death.

for better results, you may choose to:

use opti-memmedium to dilute lipo2000®prior to complexing with dna. other media without

serum (e.g.dmem)mabe used to dilute lipo2000®but transfection efficiency may be compromised.

         note:  some serum-free formulations can inhibit lipo2000 mediated transfection, for example: cd293293sfmiiandvp-sfmetc.

 

transfection  procedure for 24-well format

 for adherent cells: one day before transfection, plate cells in growth medium(withouantibiotics) so thatt hey will be 90-95% confluent at the timo ftransfection(0.5-2x105 cells/well for 24-well plate).

 fors uspension cells:on the day of transfection just prioto preparing complexes, plate 4-8x10cells/500µl of growth mediu(withouantibiotics) in 24-well plate.

  1.     for each transfection sampleprepare dna-lipo2000 complexes as follows:  dilute dna in 50µl of opti-memi reduced serum medium without serum (or other medium without serum).mix gently.

2    mixlipo2000 gentlybeforeusethen dilute the appropriate amount in 50µl of opti-mem medium (or other medium without serum). mix gently and incubate for 5minutes at room temperature.

note:combine the diluted lipo2000® with the diluted dna within 30 minutes. longer incubation times may decrease activityif dmem is used as adiluent for the lipo2000 mix with the diluted dna with in 5minutes.

after the 5minute incubation, combine the diluted dna with the diluted lipo2000® (total volumeis100µl). mix gently and incubate for 20minutes at roomtemperature to allow thedna-lipo2000®  complexes to form.the solution may appear cloudy, but this will not inhibit the transfection.note:dna-lipo2000®complexes are stable for at least 5hours at roomtemperature.

 

3.      add the100µof dna-lipo2000®complexes to each well.mix gently by rocking the plate back and forth.

4.      incubate the cells at 37oin co2 incubator for 24-48hours until they are ready to assay for transgene expression. it is not necessary to remove the complexes or change the medium; howevergrowth medium may be replaced after 4-6hours without loss of transfection activity.

for stable celllines:passage the cells at a1:10 or higher dilution int ofresh growth medium 24hours after transfection. add selective medium the following day.

fosuspension cells:add pma and/ orpha (if desired) 4hours after adding the dna-lipo2000® complexes to the cells. tip:for jurkat cellsadding pha-l and pma at final concentrations of 1µg/ml and 50ng/mlrespectivelyenhances cmv promoter activity and gene expression. fork 562 cellsadding pma alone is sufficient to enhance promoter activity.


scaling up or down transfections

 to transfect cells in different tissue culture formats, vary the amounts of lipo2000®dnacellsand mediuused in proportion to the difference in surface area (see table below). with automatedhigh-throughpusystems, larger complexing volumes are recommended for transfections in 96-well plates.note:you may perform rapid96-well plate transfections (plate cells and transfects imultaneouslyby adding suspension of cells directly to complexes prepared in the plate. prepare complexes and add cells at twice the cell density as in the basic protocol in 100µvolume.cells will adhere as usual in the presence of dna-lipo2000 complexes.

culture

vessel


surfacarea   per well (cm2)

relative surface

 area (vs. 24-well)

volume  of plating

medium

   dna (µgand dilution volume (µl)

lipo2000 ((µl) and dilution volume ((µl)

96-well

0.3

0.2

100 µl

0.2 µg in 25 µl

0.5 µl in 25 µl

24-well


2

1

500 µl

0.8 µg in 50 µl

2.0 µl in 50 µl

12-well


4

2

1 ml

1.6 µg in 100 µl

4.0 µl in 100 µl

35-mm

10

5

2 ml

4.0 µg in 250 µl

10 µl in 250 µl

6-well

10

5

2 ml

4.0 µg in 250 µl

10 µl in 250 µl

60-mm

20

10

5 ml

8.0 µg in 0.5 ml

20 µl in 0.5 ml

10-cm

60

30

15 ml

24 µg in 1.5 ml

60 µl in 1.5 ml



note:surface areas are determined from actual measurements of tissue culture vessels.

 

optimizing  transfection

    to obtain the highest transfection efficiency and low non-specificeffects, optimize transfection conditions by varying dna and lipo2000®concentrationsand cellnumber. make sure that cells are greater than 90% confluent and varydna (µg) lipo2000®  (µl) ratios from1:0.5 to1:5.


description
name lipo2000®transfection reagent
cat# 029-1.5ml cas# n/a
storage# 4℃干燥避光 shelf life# 12个月
ex(nm)# n/a em(nm)# n/a
mw# n/a solvent# n/a
name lipo2000®transfection reagent
cat# 029-1.5ml
cas# n/a
storage# 4℃干燥避光
shelf life# 12个月
ex(nm)# n/a
em(nm)# n/a
mw# n/a
solvent# n/a
400-686-3443
网站地图